CORING DRILLS

CORE DRILL, DD 150-U


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: HILTI

Model: DD150-U

Daily: $88.00

Weekly: $354.00

Quantity: for a period of
day(s) week(s)

Additional Information

AWG12 Mains voltage 75 ft
AWG10 Mains voltage 125 ft

- High flexibility and versatility: wet and dry drilling with one tool in different base materials without need to change system components.

- High motor performance and sturdy 3-speed gearing for optimum drilling speed.

- Exceptionally user-friendly thanks to self-explanatory features and controls.

- 360° adjustable side handle with integrated dust and water management functions.
- Rig-based wet drilling in concrete for pipe penetrations in plumbing, heating and air conditioning installations, for cable trays and ducts and for the installation of railings and barriers

- Hand-guided wet drilling for setting large-diameter anchors and reinforcing bars

- Hand-guided dry drilling in masonry for pipe penetrations in plumbing, heating and air conditioning installations and for chimney and stove installation

2.7 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate gauge.
Recommended minimum conductor gauge (cross section) and max. cable lengths
Conductor cross section
AWG12 Mains voltage 75 ft
AWG10 Mains voltage 125 ft
Do not use extension cords with AWG 14 gauge conductors. Use only extension cords equipped with an earth
conductor.

2.8 Using a generator or transformer
This machine may be powered by a generator or transformer when the following conditions are fulfilled: The unit must
provide a power output in watts of at least twice the value printed on the type identification plate on the machine. The
operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in the 50 – 60
Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and starting boost.

Switching other machines or appliances on and off can cause undervoltage and/or overvoltage peaks which could
damage the machine. Never operate other machines from the generator/transformer at the same time.

Also check the following item(s) related to the above:

* Prices are subject to change.

* Please call us with any questions about our core drill dd 150 u in Whistler BC, serving Squamish, Pemberton, and the Sea-to-Sky Corridor.

CORING DRILLS

CORE DRILL, DD 150-U

Additional Information

Locally Owned in Whistler: