WELDING & PLASMA CUTTING

PLASMA CUTTER


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: MILLER

Model: SPECTRUM 626 X-TREME

Daily: $78.00

Weekly: $312.00

Quantity: for a period of
day(s) week(s)

Additional Information

Required Input Pressure/Flow
6 SCFM (170 L/min.) at
90 PSI minimum (621 kPa)
120 PSI maximum (828 kPa)

Process
Air Plasma Cutting and Gouging
Rated Output
40 A at 140 VDC, 50% Duty Cycle
27 A at 91 VDC, 20% Duty Cycle

Cutting Capability
Rated: 5/8 in. (16 mm)

Cutting at 40 Amps (240 V)
Cutting at 27 Amps (120 V)
Output amperage is automatically reduced to 27 A for 120 V input.
Mild Steel Recommended Cut Speeds at 40 Amps
1/4 in. (6.4 mm) at 64 IPM
5/8 in. (15.9 mm) at 13 IPM
Note: Recommended maximum piercing capacity for hand-held applications is 5/16 inch (7.9 mm).
Maximum sever cut of 7/8 inch (22.2 mm) at approximately 5 IPM.
For aluminum and other metals with high thermal conductivity, cutting capacities may be reduced as much as 30%.

Mild Steel Recommended Cut Speeds at 27 Amps
Output amperage is automatically reduced to 27 A for 120 V input.
1/8 in. (3.2 mm) at 88 IPM
3/8 in. (9.5 mm) at 15 IPM

Note: Recommended maximum piercing capacity for hand-held applications is 1/8 inch (3.2 mm).
For aluminum and other metals with high thermal conductivity, cutting capabilities will be derated as much as 30%

Rated cut capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut.
This is the key rating that should meet or exceed your typical cutting thickness requirements.

* Prices are subject to change.

* Please call us with any questions about our plasma cutter in Whistler BC, serving Squamish, Pemberton, and the Sea-to-Sky Corridor.

WELDING & PLASMA CUTTING

PLASMA CUTTER

Additional Information

Locally Owned in Whistler: